Krash Industries Foot Rocket Cover
Krash Industries Foot Rocket Cover
Krash Industries Foot Rocket Cover
Krash Industries Foot Rocket Cover
Krash Industries Foot Rocket Cover
Krash Industries Foot Rocket Cover
Krash Industries Foot Rocket Cover
Krash Industries Foot Rocket Cover
Krash Industries Foot Rocket Cover

Krash Industries Foot Rocket Cover

Regular price $375.00

Warranty Information

H2o Industries warranties our products to be free from defects in the material or workmanship. The warranty period for our products commences on the day that the product is purchased by the original customer. H2o Industries warrants that it will repair or replace, once, any product which under normal conditions or use and service, and which has been properly installed, proves to be defective in material or workmanship. This warranty is limited to the original purchaser, and is not exchangeable or transferable to subsequent owners of the product. This warranty does not cover any accessories and specifically applies to the cover only. H2o Industries will cover all costs involved in repairing or replacing the cover, except for shipping costs. To process a warranty a $40 flat fee is charged to help pay for shipping costs involved in the warranty. The warranty covers up to one full replacement during the warranty period.


*Specifically excluded from this warranty are failures caused by misuse, negligence, modification, abuse, improper application, installation or operation, or by unauthorized service or use of unauthorized parts in connection with the product and inadequate maintenance. Aesthetics are not covered by the warranty, including staining, fading over time, spills or bleeding. It is your responsibility to ensure that when the cover is in use you take all necessary precautions to protect yourself and your vehicle. In any instance we are only liable for the cover itself. We are not liable for the vehicle.


*When handling a warranty claim, we can only exchange your cover for the cover which you originally ordered. After the original 30 days, fitment and color problems are not covered by the warranty process.


When submitting a warranty claim to our customer service department, you may be asked to provide some additional information. Once we have received the required information, your claim will be reviewed by a member of our team. If approved you will be provided with the return shipping information to return your original cover. Once received, the cover will be inspected for repair or replacement. The warranty process can take upwards of 3 weeks for completion.


*When submitting a warranty request, please provide us with your name, order information, receipt, email and phone number. Also include the reason for your request, a few pictures if applicable, and what you would like us to do to help resolve the matter. Once this information has been submitted you will receive a confirmation email, and a member of our team will contact you within 1-2 business days. We kindly ask that you do not submit more than one request or leave additional voicemails during this period, as it can cause confusion for the team member who is assisting you.


To submit a warranty/return/exchange request please email us at

Care and Cleaning

H2o Industries covers are made from a quality fabric product that can give years of enjoyable use. It is a water-repellent and mildew resistant polyester fabric. Routine care is quite simple, but certain procedures are recommended. Proper maintenance is important if maximum life of your cover is desired.


Recommended care and cleaning instructions


  1. Keep dirt, leaves and other debris from accumulating on the cover. Washing down with a garden hose on a bright sunny day is recommended about once a month.


  1. To remove dirt from either side of the material, use a soft brush and a mild soap solution (such as Ivory). Do not use bleach. Rinse thoroughly with clear water and let dry completely before storing or rolling.


  1. Do not store or roll up while wet. Be sure to clean and dry before storage. Mildew can grow during storage if moisture is present.


  1. Avoid cleaning in a commercial car wash. Do not steam or pressure wash.


  1. Keep cover secure while trailering.


  1. If accidental tears occur, repair them as soon as possible.


  1. Always clean the surface of the watercraft, and check for debris on the inside of the cover before placing the cover over the ski. Failure to do so can lead to scratching and damages to your vehicle.  We are not liable for the vehicle or any damages it incurs while under the use of our covers.


Design Features

Common Questions

Proper Use

Built-In Strap Locations

Built-in strapping locations give you the ability to strap down your jetski, minimizing the damages that straps alone can do. The use of a cam strap in the lower hem allows for tighter fitment and creates a genuinely trailerable cover that won’t budge at highway speeds.

Interior Protection

A soft inner fabric creates a buffer between your investment, and the world around it, protecting it from rock chips, scratching and rubbing damage.

Our Solution

With the jetski industry growing and changing rapidly, cover technology has remained much the same as it has been in the last 30 years. We decided that it was time for a change! The material that we use to make our covers has years of technology in it. The vinyl-coated polyester topside provides maximum UV defense, heat reduction (tested to have a temperature reduction of 25 degrees Fahrenheit), and heat reflection.

Our Solution Continued

While the warp-knit polyester underside provides and abrasion-resistant surface, making it safe to use on critical painted surfaces, delicate objects and sensitive gel coats. Ideally suited for marine environments, the material is water-resistant and mildew repellent. All of these excellent features make it the perfect material to keep your jet ski safe!

More Information

  • We were also able to address some of the most common problems with stand up jet skis and the use of a cover. Most aftermarket hull designs don’t have a bow eye or stern eye to tie down your ski. This can cause a number of problems when addressing the ability to trailer or haul your ski to the water, I.e., Straps rubbing on your gel coat, graphics, tray sides, and turf.
  • The current market standard cover is also typically made of a Cordura canvas material, which is textured. When this material is strapped down to a ski, it can scratch the gel coats and graphics. The standard cover also has a stretchy band, called a shock cord, hemmed into the bottom. This can expand during transport, allowing air to fill the cavity between the cover and the ski. This can also cause scratching and damages, but more importantly, the cover is no longer performing for its intended use at this point.
  • All of these components work together to make our covers more than just a storage cover. With the H2O Industries covers, you can effectively trailer your ski using the cover's built-in tie-down locations, trusting in our innovative advancements in the cover industry, knowing that your ski is safely secured and covered while in transport!
  • Our covers are 100% Made In The USA, with high-quality materials and craftsmanship, a 7-year limited fabric warranty, and a 5-year limited workmanship warranty*.